On this page: Images | Product resources
Redundant DC Power Supply
Redundant DC Power Supply
The Redundant DC Power Supply consists of two identical DC-DC switching converters and a low-loss (ideal diode) power combining stage. It is intended as a high-reliability source of power for mission critical UAV sub-systems.
Features:- The output voltage may be set to 5, 12 or 16V using the on-board switch and a screwdriver.
- Inputs are reverse polarity protected, and the input voltage range extends to +50VDC, allowing direct connection of LiPos up to 12S.
- Each DC-DC converter is capable of delivering up to 3 Amps continuously with up to 96% efficiency.
- The output tolerates a short-circuit to ground indefinitely.
- Weight: 13g (0.46oz).
- Dimensions: 57 x 20 x 9.2mm
The Redundant DC Power Supply is distributed internationally from Europe by VISIONAIRtronics.
If you are located closer to Australia, you can choose to purchase from Millswood Engineering.
Images
Rear view
Product resources
- Documentation:
- Data sheet: detailed description of the Redundant DC Power Supply - electrical and mechanical specifications, thermal management, typical performance graphs, safe operating area, etc.
More resources are available here.